Accent Wall Made Out of Pallets
Wood walls have come a protracted way from the paneling of the 70s. One of the excellent things about this DIY task is that the material may be sourced without cost through asking stores or searching around town for pallets. They supply impressive results no matter how large your accessory wall is. Use a stud finder to find all of the studs on your partitions. You’ll need to comfortable the boards through the partitions and into the studs. Use a pencil to mark the vicinity of the studs at the partitions. Layout your forums on the floor and set up them in order that they will in shape collectively well after you set them to the wall. Stagger the forums so that ends do not line up vertically from one row to the subsequent. Call a local electrician for completing your challenge.
Use a degree to attract traces onto the walls where you region the forums. Begin on the top of the wall. In case you need to trim some of your boards to suit them on the stop, it will likely be less complicated and look higher in case you try this at the lowest of the wall. Do not begin nailing a row till you’re sure you’ve got sufficient boards with the equal width to complete it. Work from the left aspect of the wall and vicinity the first board onto the street. Use a hammer and nail or nail gun to at ease the first board to the wall. Another time, have a pal help you with the installation. One person can preserve the board in order that it’s far stage whilst the alternative person secures it in place with nails. Maintain the method till the first row of forums is hooked up after which paintings your way down the wall.